Product Range
(Please click on the image for further information)
| Meiden
Drive Configure
|
MDC is a software configuration tool for the Meiden VT110S inverter drive. It has been designed to emulate a parameter programming unit. The software can transfer to and from a drive network using the inbuilt RS485 interface. An unlimited number of configurations may be archived and printed. Typical time to upload a full parameter set to the inverter is around 7 seconds.. considerabily faster than any other method for this series of drives. Software runs on Win95, Win98 and WinNT. |
| Opto isolated RS232 to RS485 Converter | Supports 2 and 4 wire networks so can be used for Meiden VT210S and VT230S range of drives. RTS transmit control, 4KV Opto isolation prevents damage to computer systems also prevents ground loops and noise being transferred to the connected equipment. |
|
MPCConnect
|
MPCConnect software allows communications between the Landis MPC2 controller and a PC. It is no longer neccessary to use cassette based technology for archiving on Landis Grinding machines. It is now possible to store and retrieve the PLC ladder logic onto a notebook PC. This opens up the option of archiving the machine programs onto reliable media. Software runs on Win95, Win98 and WinNT. |
